| After-sales Service: | Available |
|---|---|
| Warranty: | 2 Years |
| Certification: | ASTM, ISO9001, RoHS, CE, BV, SGS |
| Samples: |
|---|
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Traffic barriers (sometimes called Armco barriers,also known in North America as guardrails or guard rails and in Britain as crash barriers) keep vehicles within their roadway and prevent them from colliding with dangerous obstacles such as boulders, sign supports, trees, bridge abutments, buildings, walls, and large storm drains, or from traversing steep (non-recoverable) slopes or entering deep water. They are also installed within medians of divided highways to prevent errant vehicles from entering the opposing carriageway of traffic and help to reduce head-on collisions. Some of these barriers, designed to be struck from either side, are called median barriers. Traffic barriers can also be used to protect vulnerable areas like school yards, pedestrian zones, and fuel tanks from errant vehicles.
Buy Cheap Q235B W Beam Highway Guardrail Crash Barrier from China Guadrail Manufacturer Wuhan Dachu
Quality Control:
INSTALLATION CRITERIA FOR BARRIER
Please observe the following guidelines to install barrier. Our company will send the techincians and reprentative for our product guardrails instllation for all the Techincal Support and Guiance.
Preliminary operations
Where installation is to be carried out in traffic, all necessary road signs must be set up in order to direct traffic and protect workers from vehicles, in accordance with safety regulations. The parts making up the road barrier can be unloaded from the transport vehicles by means of a crane fitted to the vehicle, or forklift truck, in accordance with current safety regulations. Workers must be supplied with all required equipment, including safety shoes, gloves and goggles and -where necessary - helmets, safety harnesses and all else specifically needed for the site and required by current safety regulations.
Installation sequence
The assembly diagram provides instructions for correct barrier installation. Fully and completely follow these instructions.
Main steps:
1. Trace out a full line of reference on the ground, which will serve to align poles and beams.
2. Place the beams along the traced line taking into account the direction of traffic.
3. Posts (designated posts according to the drawings) are to be lifted vertically and planted in the
4. ground1,080 mm (or designated) deep the holes in the top and spaced 2,000mm or 4,000mm apart. A pile-driver is generally used. During this phase, please check: alignment and level of posts, distance between posts, that they are vertical, and distance from the embankment, all in accordance with the measurements and tolerances specified in the applicable drawing of reference.
5. Assemble the spacers to the uprights using the M16x50 mm bolts;
6. Assemble the beams that have been laid on the ground, attaching them to the spacers with M16x45 bolts and the beam themselves by means of bolts M16x35 supplied.
7. Use the calibrated pneumatic screwdrivers to fasten all nuts and bolts into place, checking levels and alignments.
8. Installation must always take place under the surveillance of a specialist technician, and in full compliance with the final drawing and current safety regulations.
Inspection of installation conformity
The technician responsible for the installation shall, at the very least, control conformity of the following, prior to beginning assembly, during work and upon conclusion, by using all measurement instruments necessary and in his possession:
1. Full compliance of the installation with the final drawings of reference.
2. Pole spacing and height of upper beam and current edge in accordance with that specified on the final drawings of the barrier, dilation joints and ends.
3. Length and alignment of the installation on the basis of the final drawings and the road layout and altimetry.
4. Final coupling bolt torque according to that set in the assembly diagram.
5. Compliance with all applicable safety regulations.
Contact us today for an estimate.
You are the most welcome to visit our production premises.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}